flow cell meaning in Chinese
贯流分析池
流动池
流动贮液槽 流动吸收池
流路池
流通池
岩心夹持筒
Examples
- So emitters of high quality can be produced by modification to the cell dimension and the number of flow cells , which provides efficient method for designing parameterized structure of emitters
通过修改流道单元尺寸和增减流道单元数可设计出多种流量随压力缓变的大流量优质滴头，为实现滴头参数化结构设计提供了依据。 - This paper covers two parts . the first part reported mn ( iii ) / mn ( ii ) couple was used to be the cathode in a redox flow cell . the second one studied tin - based materials for anodes in lithium - ion batteries
本文共分两部分，第一部分对mn ( iii ) / mn ( ii )电对作为氧化还原液流电池正极材料的可行性进行研究；第二部分对锂离子电池锡基负极材料进行制备、表征及电化学性质研究。 - In order to efficiently improve the stability of the apparatus , a dual - optical detection circuit was adopted . to eliminate the multiple scattering effects on transmittance measurements , the range of the transmittance was limited to 70 - 100 % by adjusting the width of the light flow cell and changing the intensity of the incident light through regulating the load voltage of the laser light source . moreover , the data acquisition software was programmed in microsoft visual bas
通过调节激光光源负载电压改变光强度及调摘要整检测池的宽度，消除了多重散射对透光率的影响，将透光率的变化范围控制在满足beer1a毗ert定律的范围内工将温度、溶液密度和透光率信号经模数转换，并用microsoftvisualbasic语言编写的数据采集软件，实现了实验过程中各被测量的自动连续采集。 - Eight trapezoid labyrinth flow - channels are designed through modification to the cell dimension and the number of flow cells based on the parameterized structural design . integral emitter prototypes combining exterior hull and exterior flow - channel are built using rapid prototyping technique , and structural dimension of those flow - channel are measured by optical microscope , the measuring results showed that the design can completely meet the requirement of emitter accuracy
文中以参数化的设计思想，通过改变梯形迷宫流道单元尺寸和单元数设计了8种梯形迷宫流道，采用快速成形技术制作出外管与内迷宫流道一体化的滴头原型；利用最小标注尺寸为50nm的光学显微系统对滴头流道结构尺寸进行了测量，分析结果显示流道尺寸精度完全满足滴头的制作要求。